News

I'm excited to give you a preview of Peach Patterns next pattern for women. The "Maple Cardigan" is a sewing pattern for a fabulous womens' cardigan which is sure to become a wardrobe staple. We are currently looking for testers who can make the cardigan and provide modelled photos between 24 June and 4 July 2018.

Some of the features of this pattern:

• Quick and easy sew;
• Two options (Drape Front and Banded Front);
• Looks great in a wide variety of knit/stretch fabrics including jersey, spandex, rayon and viscose jersey/spandex mixes, brushed poly, stretch velvet, stretch lace, french terry;
• Makes a fabulous transition piece for between seasons (using a lighter knit) or a warm layer in winter (using heavier knits).

If you're interested in testing the "Maple Cardigan", please apply via the Google Form.

Fans of the the Peach Patterns Pearlie Dress & Peplum Top will know that this pattern is already a really quick sew. Having said that, attaching neck bands is usually the number one cause of heartache associated with sewing patterns for knit or stretch fabrics.

At some stage you will definitely want to try and make a neck band for your Pearlie Dress. There are two options (narrow and standard) and, really, they are fun to make. But if you're in a rush or are new to sewing with knits then you might like to give this method a try. 

Making your neckline in this way creates a slightly different look: less "t-shirty" (if that's a term?) and a little more dressy.

All you will need is a twin sewing machine needle for stretch fabrics and two spools of thread in the same colour. Fusible hemming tape is optional but not required (we made ours without using hemming tape). 

Enjoy these pictures of our Pearlie Dress taking a twirl in the park and then scroll down to check out our tutorial for the "Easiest Ever Fold and Sew Knit Neckline". (I made this Pearlie dress with the slim fit bodice option. However as you can see there's still some ease in the bodice as I sized up to allow room for growth.)

HOW TO MAKE THE FOLD AND SEW NECKLINE FOR YOUR PEARLIE DRESS OR PEPLUM TOP:

Supplies:

• Twin sewing machine needle for stretch fabric (My preferred needle for finishing necklines, armholes and hemming knit fabrics is the Schmetz Size 75/4.0mm Twin Stretch Needle.)
• Two spools of thread in the same colour.
• Optional: Fusible hemming tape to press and hold the fabric around the neckline seam before sewing. (As mentioned, I made my dress without using the tape.)

Step 1

Extend the neckline area of your Front and Back Bodice pattern pieces by 1/2" (15mm) evenly all the way along (see diagram below).

You can do this by either:

A. Placing your original pattern pieces on some tracing paper/pattern paper and drawing the modified lines around the pattern pieces before pinning them to your fabric; OR

B. Pinning your original pattern pieces to your fabric and using an erasable fabric marker to mark the extended cutting lines on your fabric.

It will help to use a tape measure to mark some points at 1/2" (15mm) all the way along the new curves before connecting the points with your marker.

Step 2

After sewing the Front and Back Bodice pieces together as indicated in the sewing instructions, press the shoulder seams and then press down the neckline area wrong sides together by 3/8" (1cm).  (Note: if you choose to use fusible tape for this step, follow the manufacturer's instructions to apply and press the fabric/tape together.)

Step 3

Insert your twin needle into your sewing machine, thread it and sew around the neckline 3/8" (1cm) from the folded edge. Sew carefully making sure you catch the raw edge on the wrong side of the fabric with your bobbin thread. (If you are new to sewing with twin needles you may want to have a practice on a piece of folded fabric first to ensure that you are using the correct seam allowance). 

Give the neckline area a press and that's it! Finish the remaining steps of the sewing instructions and enjoy your new Pearlie :)

Pattern: Peach Patterns Pearlie Dress & Peplum Top for Girls Sizes 1-12

Fabric: "Alaska White" Digital Print Knit Fabric from Dizzy Daisy Fabric Studio

If you have a go at this tutorial I'd love you to share your pictures in our Peach Patterns Sewing Group on Facebook or on Instagram with the hashtags #peachpatterns #pearliedress

Do you love the Peach Patterns Leilani Romper for Girls and want to make it a little easier to get on and off? Grab a cuppa and sit tight because this is for you!  In this post we’ll run through two ways to add elastic to the shoulder straps/ties of the romper so that it can be pulled on and off easily without having to undo anything or mess around with the ties.

Two methods to choose from

Fixed Elastic Straps are for those who want a clean and simple look without ties. With this method small lengths of elastic are inserted into short straps which are then sewn into the front and back of the shoulders between the romper top and the ruffle overlay.  Check out our previous blog post for lots of photos of our romper with fixed elastic straps in action!

OR:-

Elastic Ties are for those who love the look of the longer ties but also want the convenience that the elastic gives (the best of both worlds really!). After sewing some elastic into the lower part of the ties, you then go on to sew the ties in the same way that you would the regular shoulder ties. The elastic in the ties allows them to stay tied up whilst being pulled on and off over the shoulders.

What you need to make elastic straps/ties

The supplies you will need are:

• A fabric loop turner. You can buy one of these cheaply online or at your local fabric store.
• A small amount of narrow elastic. I have used 6mm (1/4”) wide elastic for my straps because this fits easily into the fabric tubes which you will create to make your straps or ties. A soft and pliable style of elastic like braided or knitted elastic is best for these techniques.
• To give added strength to the area where you will be attaching the elastic you may also want to fuse some lightweight interfacing to each of the four shoulder caps of your OVERLAY (or FACINGS for the basic romper option). Small squares of approximately 2cms (3/4") will do the trick. Follow the directions to apply the interfacing to the wrong side of the fabric.
• A safety pin which will help you guide your straps/ties into place for sewing.

Which steps are replaced in the sewing instructions?

The straps/ties are inserted after Step 6 in the "Leilani Romper for Girls Sewing Instructions" when the TOP and OVERLAY (or in the case of the Basic Romper Option, the TOP and FACINGS) have been sewn together.

For both the methods below I sew the TOP and OVERLAY or FACINGS together around the neckline and armholes but leave the shoulder caps open as specified in the pattern instructions. Do not trim the neckline seam until after the straps/ties have been sewn into place.

First Method: How to Make Fixed Elastic Straps

1. Cut two lengths of elastic according to the suggested amount for your size in the "Elastic Cutting Guide" below. 

2. Cut two rectangles of fabric which are each the same width as the SHOULDER TIE pattern piece and twice the length of your elastic pieces (because you will need to gather each tube up to a half of its size when the elastic is inserted).  

3. Make your fabric tubes according to the “Loop Turner” method described in Step 7 of the "Leilani Romper for Girls Sewing Instructions". Turn them right side out and press.

4. Insert a piece of elastic into each fabric tube until the raw edges meet at one end. Sew back and forth across the width of the fabric/elastic (within the 1cm or 3/8” seam allowance) to secure the raw edges together. 

5. Gather the excess fabric along the length of the elastic by pushing it towards the sewn end until the raw edges meet at the other end. Sew back and forth across the width of the fabric/elastic (again within the 1cm or 3/8” seam allowance) to secure the raw edges together.  The photo below shows your finished straps, ready to be sewn into the romper.

6. Take your romper (which is turned inside out) and insert one end of a strap into one of the gaps in the shoulder caps (attach a safety pin to one end and use it to guide the strap into place if you need help inserting it). Match the raw edges of the strap with the raw edges of the shoulder cap and pin in place. Sew the gap closed (forwards and backwards).

7. Take the loose end of the strap and pass it across the side seam of the romper underneath the OVERLAY or FACINGS and to the opposite shoulder cap being careful not to twist the strap.  Insert and sew it into the gap as per the instructions above.

8. Repeat  Steps 6 & 7 with the remaining shoulder strap on the other side of the romper.

9. Trim the neckline and armhole seams, turn the romper right side out and pull the straps up into place.  Press around the neckline and armholes and topstitch as per the "Leilani Romper for Girls Sewing Instructions".

Second Method: How to Make Elastic Ties

1. Cut four lengths of elastic according to the suggested amount for your size in the "Elastic Cutting Guide" below. 

2. Cut four rectangles of fabric using the SHOULDER TIE pattern piece from your Leilani Romper pattern. (Note the pattern piece is long enough to allow for the gathering in this method but you could add 5 cms or so to the length of the ties if you want them to be a similar length to the standard Leilani Romper shoulder ties.)

3. Make your fabric tubes according to the “Loop Turner” method described in Step 7 of the "Leilani Romper for Girls Sewing Instructions". Turn them right side out and press.

4. On your fabric tube, make a mark or place a pin at a point twice the length of your elastic piece from one end.

5. Insert a piece of elastic into the fabric tube until the raw edges meet at one end. Sew back and forth across the width of the fabric/elastic (within the 1cm or 3/8” seam allowance) to secure the raw edges together.

6. Gather the excess fabric (from the marked point only) along the length of the elastic by pushing it towards the sewn end until the marked point meets the end of your elastic which is inside the tube. Sew back and forth across the width of the fabric/elastic to secure the inside end of the elastic within the fabric tube. (You can add embellishments like the bead in the photo below before tying a knot in the other end.)

7. Repeat the process above to make the remaining three SHOULDER TIES.

8. Insert and sew the SHOULDER TIES into your romper following Step 8 of the "Leilani Romper for Girls Sewing Instructions".

Tie the shoulder ties as normal when wearing the romper and leave them tied up to pull the romper on and off.

PLEASE NOTE: The Elastic Cutting Guide Below contains suggested lengths only because of the different preferences for where you or your child will want the bodice of the romper to “sit” on the body.  Longer elastic = lower bodice and shorter elastic = higher bodice.

And that's it! I hope you enjoy making your easy on/off romper :) 

Thanks for visiting and don't forget to check out our previous blog post with more pics of our Leilani Romper with the fixed elastic straps. And if you make one we'd love you to drop into the Peach Patterns Sewing Group and share some pics with us or share them on Instagram and tag your photos with #peachpatterns #leilaniromper.

I’m grateful to our brilliant pattern testers Natalie @taliajane_designs and Tanya @sewvolution who enabled me to develop this tutorial by sharing their techniques and suggestions with me.  

Lots of you have asked how to sew your Leilani Romper for Girls with elastic straps or elastic ties so that the romper is super easy to get on and off. Adding elastic to the shoulders is a simple pattern hack which is great for all ages but especially for teeny little romper wearers who are potty training or learning to be independent dressers.

Before we get down to business with the tutorial (check it out in the next post here) I hope you'll enjoy all these lovely pics of our very own Leilani Romper made with the fixed elastic straps in a cute sailing boat print rayon.

All the planets aligned for our photo session: a sunny late summer afternoon; a model who was in the mood for some serious posing and a little car trip which had been planned to Sydney's beautiful Rose Bay Wharf - the perfect backdrop.

It's a LONG way to London from here!!

Thanks for visiting and don't forget to check out the tutorial on making the Leilani Romper for Girls with elastic straps or ties in our next blog post. And if you make one we'd love you to drop into the Peach Patterns Sewing Group and share some pics with us or share your photos on Instagram and tag them with #peachpatterns #leilaniromper.

This is the second part of a two part blog series about the Peach Patterns Mama Leilani Top & Dress PDF Sewing Pattern. In this part we're covering everything you need to know to choose the best fabric for your top or dress. The series also covers pattern options, sewing tips, design inspiration and blog reviews in Part 1 (here).

The key to getting a great finished top or dress with the Mama Leilani pattern is choosing the right fabric. The main feature of the design is the ruffle overlay and in order to create the pretty folds you are aiming for with this feature its important to use a fabric that will behave in the right way when being worn. This is especially so with the women's dress as there is the added consideration that the overlay needs to drape over our curvier figures.

Rayon

The rayon fabrics pictured here are (clockwise from upper right):

Watercolor Burst Rayon Challis in Blue/Coral from Style Maker Fabrics

Premium Floral Picasso Rayon Poplin from LA Finch Fabrics

Turquoise Digital Boho Rayon Challis from LA Finch Fabrics

Ginger Yellow Rayon Fabric by JPFabrics on Etsy

The favourite fabric choice for this pattern is undoubtedly rayon (also known as rayon challis or viscose) as it will give you the optimum drape and flattering silhouette.  All of the big chain fabric shops and loads of online sellers now carry rayon in a huge range of both prints and solid colours.  Rayon can be a little more challenging to cut and sew than cotton.  The best tip for cutting your pattern pieces when using rayon is to find as large a surface as possible and spend extra time smoothing your fabric out and aligning the selvedges. Use plenty of pins AND fabric weights.  If the fabric does shift a little and you find your matching pieces are slightly different, pin them together and trim them to match before sewing.

Silk or Crepe

The silk and crepe fabrics pictured here are (clockwise from upper right):

Crepe Amaranthe from MaaiDesign

Designer Silk Crepe de Chine from Cali Fabrics

Telio Moda Crepe Bird from Fabric.Com

Savannah Crepe Ivory from Fabric Godmother

If you are up for a challenge and want to create a pretty, special occasion dress you may want to have a go at using silk or crepe for the pattern.  The advice about cutting and sewing fluid fabrics (see rayon) applies even more here!

Cotton, Voile or Lawn

The cotton fabrics pictured here are (clockwise from upper right):

Paisley Block Print Cotton from IndianStores on Etsy

Textured Printed Tencel from Spotlight

Parakeets Cotton Lawn from Fabric Godmother

Art Gallery Sage Voile Painted Night Desert by Bari J from Fabric.Com

If you are going with a cotton fabric, avoid any mid weight to thicker cottons such as patchwork, quilting weight cotton and broadcloth. Instead choose soft and light weight options like voile or lawn or tencel. Indian style block print cottons are another fabulous choice as they usually come on a base cloth which is super soft to touch and comfortable to wear.

No matter which fabric you choose, don't forget to wash and press it before cutting your pattern pieces. Many of the fabric types discussed here will shrink after washing and this is especially so for rayon.

Adjustable Straps

Image at left: by Susana of Suco by Susana Image at right: Sew Squirrel

You won't regret having a go at making a Mama Leilani Top or Dress with Adjustable Straps. It's easier than you think and there's an additional full photo tutorial in the pattern to show you exactly how to do it. Here are some links to suppliers who sell the ring and slider hardware you'll need for this option:

Australia:

I have used and recommend Sew Squirrel.

Textile Traders.

Europe and the UK:

English Couture Company

Evie La Luve DIY

Studio Costura Shop on Etsy

North America:

A search on Etsy for "rings and sliders" and/or "bra making hardware" will bring up several US sellers of these supplies.  Arte Crafts is one we found which offers a good range.

Another tip shared in the Peach Patterns Sewing Group is to recycle rings and sliders from old bras or lingerie that you’re no longer wearing.

And that's about it for now! I hope you've enjoyed reading this series and if you make yourself a Mama Leilani Top or Dress please hop over and share it in the Peach Patterns Sewing Group and/or on Instagram with the hashtags #peachpatterns and #mamaleilani.